Honda introduces new snowblowers

A hybrid model is now part of the lineup.

November 9, 2011
Supplier News

Honda Power Equipment introduced its first all-new hybrid snowblower model for the U.S. market and two new snowblower series to join the company’s lineup.

All-new for 2011 is the Honda HS1336i hybrid model, along with the new Honda HS928 Series (replacing existing HS928 snowblowers) and Honda HS1332 Series (replacing the existing HS1132 snowblowers).

Honda HS1336i Hybrid Snowblower

The hybrid configuration of the all-new Honda HS1336i snowblower combines a gasoline engine that simultaneously drives the model’s auger/fan apparatus (clearing and throwing the snow) and charges the battery, with the electric motors (two in parallel) controlling the track drive forward propulsion. These motors also function as a generator during deceleration of the snowblower – serving to regenerate electrical energy.

Equipped with the Honda iGX390 four-stroke overhead valve (OHV) horizontal shaft engine, the HS1336i snowblower operation results in lower fuel consumption, lower emissions, lower noise and reduced vibration as compared to a conventional snowblower. In addition, the iGX390 incorporates an improved inner muffler construction. Because the iGX390 is equipped with an auto choke (a choke that automatically controls the flow of air to the carburetor), starting operation is simplified, regardless of the atmospheric or engine temperature.

•    Turning on the spot. Two independent electric motors that control propulsion are positioned in parallel on the HS1336i. These two motors contribute to smooth turning of the snowblower when in operation. At low speeds, an operator can turn the HS1336i on the spot, and at high speeds, the snowblower can be turned smoothly on a curve.

•    External lever. The choke shaft of the Honda HS1336i hybrid snowblower can be easily operated – even when the carburetor is frozen – with a single press of the external lever.

•    Snow clearing mode. The Honda HS1336i hybrid snowblower is designed with a three-mode switching function that allows the operator to manage a variety of situations and conditions. The auto mode, power mode and manual mode options are available only on the new hybrid system (as compared to conventional models).  

•    Reset mechanism for vertical movement of the auger. The auger feeds the snow to the high-speed impeller where the impeller blows the snow out of the machine. In the event that this feed is disrupted, the design of the Honda HS1336i hybrid allows the operator to reset the vertical movement of the auger so that it can revert to its normal position.

•    Rear cover. The rear cover is integrated with the tool box, allowing for an easy-access, wide opening through which the operator can pull out or put away any implement needed.

Honda HS1332 and Honda HS928 Series Snowblowers

Two introductions to the Honda snowblowers lineup are the HS928 Series (HS928WA, HS928WAS, HS928TA and HS928TAS replacing the existing HS928 models) and the all-new HS1332 Series (HS1332TA and HS1332TAS replacing the existing HS1132 models). 

Powered by a newly designed, high-torque Honda GX270 OHV engine, the HS928 Series is intended for aggressive snow clearing in demanding environments and is available in both wheel-driven and dual-track, self-propelled models. Its newly enhanced design enables a 28-inch clearing width and a discharge distance of up to 49 feet. The new HS928 also offers a choice of manual or electric starting.

Honda's solution for increased capability in a walk-behind machine is the new HS1332, clearing a 32-inch swath with its new commercial grade GX390 Honda four-stroke engine. The newly designed track-driven HS1332 can move 65 tons per hour at a discharge distance of up to 56 feet. Like the HS928, the HS1332 is available in both easy-starting manual or electric starter-equipped models.

Both new product families have improved performance over the models they replace, are eco-conscious, and are tough performers in the most extreme of environments. The advanced designs of each snowblower series can be illustrated via a discussion across the following categories: ease of work; operability; toughness; and noise reduction/fuel economy.

Ease of Work
•    Egg-shaped disk. When it comes to replacing the shear bolt on a snowblower, the design of the machine dictates the ease with which the part can be changed. On the all-new Honda HS1332 snowblower models, the design allows for a simple and easy shear bolt replacement. These Honda models are equipped with an egg-shaped disk that allows for almost effortless removal, alignment, and replacement of the shear bolt(s) when required.

•    Impeller. The new Honda HS928 and HS1332 snowblowers incorporate an improved design which serves to maximize snow-throwing distance and improve durability (over models they replace). In the new models, the shape of the impeller is modified to allow for these enhancements.

•    Impeller speed. In addition to snow-throwing distance being increased, operational noise also is reduced on the new HS928 and HS1332 snowblower models. These improvements are due, largely in part, to adjustments in ratio of both the engine-side pulley and impeller-side pulley.

•    2-ply rated tires. The new wheel-equipped Honda HS928 and HS1332 snowblower models have 2-ply rated (2 PR) tires with increased rigidity. This increased rigidity increases the overall stability of the body of the snowblowers.

•    Electric two-stage shooter. An electric two-stage shooter (controlled by an easy-to-use operating lever) on the new Honda HS928 and HS1332 models allows for better control of the direction snow is thrown. With the two-stage shooter, the direction of snow can be adjusted more widely.